Okay.
I've built a box out of scrap which will serve as the containment area for my 'sand press' to laminate the heater enclosure.
This was made from some scrap plywood that had been lying aound, and Im hoping it will be sturdy enough to contain the sand for the press.
I'm also performing a test to see if the epoxy I'm using will stick to the poly-ethene sheeting that I plan to use to keep the sand out of the epoxy layer on the heater.
These are the bags of sand I plan to use as weights.
Next post will be of the lamination of the first half of the heater.
No comments:
Post a Comment